Automotive News

Depth of the music is very important for all those who are all music enthusiasts. They also aim at giving a powerful music and equally good sound. So they are more interested in developing such a stereo. The high range of music is generally handled by the speakers at the rear decks, door panels and at the dash. A sub woofer is no substitute for a device which can handle lower ranges which also separate a audio system and stock system. As far as an audio professional is considered he can handle the job of installing sub woofer to your system. Even an individual can try doing it. But how to install a sub woofer in a factory stereo?

Generally it is a minute job for audio professionals to perform this task of installation. But even an individual can learn how to install a sub woofer in a factory stereo. There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy to complete the task. It may include trim panel removals, Philips head screw driver, speaker wires.

The negative cable from the car’s battery is removed initially. The battery’s negative terminal is actually connected with the negative cable and to the car’s frame. The cable’s clamp is loosened with the use of a Philips screw driver. The clamp is removed and it is kept aside until the task is accomplished.

Second step is to find out the amplifier. If it is not an after marker amp and if it is factory installed one vehicle manual can help us locate the amplifier of the vehicle. Next step is to decide where the woofer should be placed. The choices available are car trunk or hatch back or cargo area of SUV on the rear side.

Fourth step is very important. The speaker wires should be connected with the positive and negative terminals of the amps correctly. The next step needs some attention. The wires of the speaker should be routed to the place where sub woofers are present. Suppose if the location of sub woofers is not near the amplifier then wires can be taken under the carpet of the vehicle. Use trim panel removal tool for prying of panels at the openings of the door. The trim panels can be replaced by hand itself after laying the wires under the carpet.

The trim panels at the opening of the door are all pried from the floor free by using a trim panel removal tool. The carpet is then lifted up and the wiring is laid beneath it. Then using the hands the trim panels are replaced.

The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.

This article would have provided a complete answer on How to Install a Sub woofer in a Factory Stereo with step by step instructions without the help of professionals to do the job.

Learn more about Auto. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.